Fantech DM3000P Air Cleaner – TRUE HEPA (Duct-Mount)

$598.00 CAD

  • Manufacturer: Systemair Inc.
  • Model Series:   fantech True HEPA Air Cleaners
  • Item Description: fantech DM3000P HEPA Air Cleaner   (Duct-Mount Only) 
  • Manufacturers’ Part Number:   40217
  • Nominal Size:  20 x 16 x 10.5 inches
  • Required Supply Voltage: 120 VAC
  • Operation: Includes built-in automatic air flow sensor
  • Maintenance Schedule: See documents folder below
  • Purifying Technologies Utilized:  MAC + HEPA

Any Questions? Call 613-727-4328 or Send a Message Online


Fast Shipping to Canada & U.S. (Shipping Policy)

Local Pickup (Ottawa Store - K2E 7M3)


Purchase this product now and earn 59,800 Points!
Secure Checkout via Paypal

Fantech DM3000P Air Cleaner – TRUE HEPA (Duct-Mount)

Model NO.: DM3000P , Fantech TRUE HEPA Air Cleaner.

Fantech True HEPA Whole-Home Air Cleaner

( Model DM3000P – Duct Mount Model )

( Model CM3000 – Collar Mount Model )

The fantech HEPA Air Cleaner is specifically designed to be connected to the cold air return of a residential HVAC system (gas furnace / air handler).

With a powerful built-in motor running at 240 CFM, the fantech HEPA Air Cleaner will destroy chemical and biological contaminants, as well as odours throughout your home.

Note1:The model DM3000P includes a differential pressure switch. As air flow is detected, the DM3000P will automatically turn ON. When air flow is not detected, it will automatically turn OFF.

Note2: The model CM3000 does not include a differential pressure switch. It will only run in continuous mode.

IMPORTANT: Must be wired to 120 volts constant power.

Fantech DM3000P Installation Instructions

  1. Materials Furnished: One fantech DM3000P duct-mount Air Cleaner. One HEPA filter (40193), one prefilter & one carbon filter (40195), 5ft power cable, metal furnace mounting plate, qty.14 self tapping sheet metal screws, qty. 4 housing cabinet screws, clear plastic tubing and grommet used for pressure switch, paper mounting template, instructions.
  2. Materials NOT Furnished: 120 volt power extension cable (if required)
  3. Tools Required: Electric drill, tin snips, eye protection, safety gloves, tape measure, marker, level, philips screwdriver.
  4. Carefully inspect the HEPA Air Cleaner for any damage.
  5. Remove the HEPA and prefilters and set aside.
  6. Determine optimal mounting location within your cold air return plenum.
  7. Ensure a minimum width of 16” and a vertical length of 26”.
  8. Temporarily attach the included paper template with tape to the desired location of the return air duct wall. Ensure the template is level.
  9. Cut both rectangular holes as per template.
  10. Screw metal mounting plate on to furnace duct with provided sheet metal screws.
  11. Fully bend all 6 metal tabs completely back into the duct opening (3 tabs per opening).
  12. Ensure the 4” negative static pressure tube from the pressure switch is fully inserted into the cold air return duct with no obstructions.
  13. Attach the unit to the mounting plate with 4 screws provided in the kit.
  14. Drill a 5/16” diameter hole in the duct wall of the supply plenum (hot air side).
  15. CAUTION: Drill hole a minimum of 8” from your AC COIL located in your supply plenum.
  16. Carefully install the black rubber grommet into the hole.
  17. Measure a distance of ½” from one end of the plastic tube, mark line with marker.
  18. Slide this end of the tubing through the centre of the grommet up to the ½” mark.
  19. Securely connect the other end of the tubing to the positive pressure of the differential pressure switch (black coupling located at the bottom of the unit).
  20. Install the HEPA and prefilters as per airflow indicated within instructions.
  21. Switch the rocker switch to “STANDBY” or “CONTINUOUS” modes.
  22. Connect to 120 volt constant power.
  23. The HEPA Air Cleaner is now fully functional.
  • Replace both prefilters (40195) every 3-6 months or as needed.
  • Replace the HEPA filter(40193) every 1-2 Years as needed.

Technical parameters

Product
Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 150 W
Input current 1 A
Air flow 113 L/s
Static pressure 100 Pa
Certificate CSA
Dimensions and weights
Weight 22.9 lb

Documents:

Weight 30 lbs
Dimensions 22 × 18 × 12 in

Reviews

There are no reviews yet.

Be the first to review “Fantech DM3000P Air Cleaner – TRUE HEPA (Duct-Mount)”

You may also like…

Shopping Cart
Scroll to Top