Greentek Profile Series 0.7E Energy Recovery Ventilator (ERV)

Greentek Profile Series 0.7E Energy Recovery Ventilator (ERV)

PROFILE features a slim housing, side port connection, energy recovery core, and supply fan modulation for frost prevention. Ideally suited for condominiums and apartments.
PROFILE brings a continuous supply of fresh air into the premises while exhausting an equal amount of contaminated air out. The energy recovery core transfers both heat and moisture from the outgoing exhaust air to the incoming fresh air reducing the energy required to condition it. In summer time, the appliance removes humidity from the fresh air and in the winter time, it heats it while retaining humidity to keep the living area comfortable year-round.

Features

• Energy Recovery Ventilator (ERV)
• Airflow up to 129 cfm @ 0.4” w.g
• Compact light-weight design with 10” installed depth
• Energy-efficient crossflow core with SRE up to 77% (0C/32F)
• MERV3 filter with MERV8 or MERV13 as optional replacement filters
• -D versions equipped with a mechanical shut-off damper
• -EC versions are ENERGY STAR Certified
• -M versions suit mirrored floor plans
• -HC versions suit direct connection to the home electrical mains
• Certifications: CSA, HVI, ENERGY STAR® (PROFILE 1.2E-D-EC only)
• Limited warranty (7 years on motors, 5 years on parts and core)
• No drain required

Optional Controls

• STS 2.0 (461580) – Programmable touch screen wall control
• EHC 2.5 (415518) – Electronic multi-function dehumidistat
• EHC 2.0 (415520) – Multi-function controller
• T4 (415519) – Wired digital timer 20/40/60 minutes
• T5 (463915) – Pushbutton timer 20/40/60 minutes
• RD-1 (463020) – Dehumidistat

Fans

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Energy Recovery Core

AHRI certified core made from water vapor transport durable polymer membrane that is highly permeable to humidity. The ERV core is freeze tolerant and water washable. Core dimensions are 8.5” x 8.5” (216 x 216 mm) with a 8” (205 mm) depth.

Frost Prevention

A preset frost prevention sequence is activated at an outdoor air temperature of 14°F (-10°C) and lower. During the frost prevention sequence, the supply blower shuts down and the exhaust blower switches into high speed to maximize the effectiveness of the frost prevention strategy. The appliance then returns to normal operation, and continues the cycle.

Serviceability

Core, filters, fans and electrical panel can be accessed easily from the access panel. Core conveniently slides out with only 8” (205 mm) clearance.

Duct Connections

4″ (100mm) round metal duct connections with rubberized seal.

Case

22 gauge G90 galvanized corrosion resistant steel case (pre-painted door).

Insulation

Insulated with 1 in. (25 mm) of high density polystyrene.

Filters

Two (2), UL900 certified, washable electrostatic panel type air filters 8.5″ (216mm) x 8″ (205mm) x 0.125″ (3mm).

Installation

Appliance is typically hung by using ceiling bracket supplied with appliance. Optional chain kit available.

Limited Warranty

7 years on the Motor, 5 years on the electrical components and the core.